BDS Suspension 4

BDS Suspension 4" Coil-Over 4 Link Lift Kit | 11-16 Ford F-250/F-350

Be the first to review this product

$4249

USD 06-23-2022

Free shipping to the lower 48

Financing Available

BDS products are experiencing delays. NX2 shock kits are around 6-8 week lead time. Kits with Fox shocks 12+ weeks, Coilover kits 14-16 weeks, Radius arm and 4 link kits around 8-10 weeks. Additional delays are possible and changing daily.

Part Number

590F

Details

If you're looking for a kit to outperform on the trail and on the street then the BDS coilover conversion 4-link systems is for you. This system uses a pair of precision tuned FOX 2.5 factory series remote reservoir coilovers for superior dampening capabilities and fade free performance when your blazing a trail on the harshest of terrains. While utilizing a pair of specially tuned FOX 2.5 factory series remote reservoir coilovers designed for the weight of the Powerstroke diesel Super Duty, the coilovers come prebuilt for 4" of lift and ready to install right out of the box. They use a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs, 6061-T6 billet aluminum ends and specially formulated race proven oil. The threaded body is easily adjustable to dial in ride height to compensate for accessories like heavy winch bumpers. Also included are heavy duty upper and lower mounting brackets that bolt into the factory coil bucket and lower axle mount for easy installation with no welding required. The upper brackets integrate a mount to secure the remote reservoir. An auxiliary FOX 2.0 gas shocks is used up front to further improve dampening capability.

Upgrading the factory stamped steel radius arms this system converts over to a true 4-link design to improve drivability, performance and strength. The heavy duty 1/4" thick steel frame mounted 4-link brackets bolt into factory holes to allow the four massive tubular control arms to be installed. These arms are build from 2" OD x .250" wall tubing with large greaseable bushings. 4-link design optimizes the front suspension geometry and reduces caster change through wheel travel to less than 1-degree.

Also included up front of this system is a forged drop pitman arm and front track bar relocation bracket to correct steering and track bar angles as well as to center the axle under the vehicle. Front bump stop extensions, sway bar drops, and brake line relocation brackets round out the front of this system. In the rear, this kit lifts and level the stance using your choice of a replacement rear lift block or GlideRide leaf springs. The leaf springs use a 5-leaf design with built in overload leaf to assist when carrying heavy loads. New black e-coated u-bolts, brake line brackets and Fox 2.0 performance gas shocks are supplied to round out the rear of the 4" coilover conversion 4-link system.

As with all BDS lift kits this performance coilover system is backed by Factory Protection Plus offing BDS's No Fine Print Warranty and 5-year, 60,000-mile drivetrain protection.

Notes

  • Removal of factory block required. Rear add a leaf is required for models equipped with factory 3-7/8" block for level to tail high stance. Single add-a-leaf kit # 113218 recommended for more level stance - Dual add-a-leaf kit # 113209 recommended for tail high stance. (Add-A-Leafs do not apply to rear leaf spring equipped systems).
  • If equipped with 2-piece driveshaft, a driveshaft alignment kit (#123402) may be required.
  • Although extremely rare, front and/or rear driveline vibration may occur.
  • If equipped with rear sway bar, #123009 required.
  • U-bolts will not work on dually.

Fitment

2016 Ford F-250 Super Duty King Ranch 4WD
2016 Ford F-250 Super Duty Lariat 4WD
2016 Ford F-250 Super Duty Platinum 4WD
2016 Ford F-250 Super Duty XL 4WD
2016 Ford F-250 Super Duty XLT 4WD
2015 Ford F-250 Super Duty King Ranch 4WD
2015 Ford F-250 Super Duty Lariat 4WD
2015 Ford F-250 Super Duty Platinum 4WD
2015 Ford F-250 Super Duty XL 4WD
2015 Ford F-250 Super Duty XLT 4WD
2014 Ford F-250 Super Duty King Ranch 4WD
2014 Ford F-250 Super Duty Lariat 4WD
2014 Ford F-250 Super Duty Platinum 4WD
2014 Ford F-250 Super Duty XL 4WD
2014 Ford F-250 Super Duty XLT 4WD
2013 Ford F-250 Super Duty King Ranch 4WD
2013 Ford F-250 Super Duty Lariat 4WD
2013 Ford F-250 Super Duty Platinum 4WD
2013 Ford F-250 Super Duty XL 4WD
2013 Ford F-250 Super Duty XLT 4WD
2012 Ford F-250 Super Duty King Ranch 4WD
2012 Ford F-250 Super Duty Lariat 4WD
2012 Ford F-250 Super Duty XL 4WD
2012 Ford F-250 Super Duty XLT 4WD
2011 Ford F-250 Super Duty King Ranch 4WD
2011 Ford F-250 Super Duty Lariat 4WD
2011 Ford F-250 Super Duty XL 4WD
2011 Ford F-250 Super Duty XLT 4WD
2016 Ford F-350 Super Duty King Ranch 4WD
2016 Ford F-350 Super Duty Lariat 4WD
2016 Ford F-350 Super Duty Platinum 4WD
2016 Ford F-350 Super Duty XL 4WD
2016 Ford F-350 Super Duty XLT 4WD
2015 Ford F-350 Super Duty King Ranch 4WD
2015 Ford F-350 Super Duty Lariat 4WD
2015 Ford F-350 Super Duty Platinum 4WD
2015 Ford F-350 Super Duty XL 4WD
2015 Ford F-350 Super Duty XLT 4WD
2014 Ford F-350 Super Duty King Ranch 4WD
2014 Ford F-350 Super Duty Lariat 4WD
2014 Ford F-350 Super Duty Platinum 4WD
2014 Ford F-350 Super Duty XL 4WD
2014 Ford F-350 Super Duty XLT 4WD
2013 Ford F-350 Super Duty King Ranch 4WD
2013 Ford F-350 Super Duty Lariat 4WD
2013 Ford F-350 Super Duty Platinum 4WD
2013 Ford F-350 Super Duty XL 4WD
2013 Ford F-350 Super Duty XLT 4WD
2012 Ford F-350 Super Duty King Ranch 4WD
2012 Ford F-350 Super Duty Lariat 4WD
2012 Ford F-350 Super Duty XL 4WD
2012 Ford F-350 Super Duty XLT 4WD
2011 Ford F-350 Super Duty King Ranch 4WD
2011 Ford F-350 Super Duty Lariat 4WD
2011 Ford F-350 Super Duty XL 4WD
2011 Ford F-350 Super Duty XLT 4WD

Product Reviews (0)

Write a Product Review

Be the first to write a review!


About Us
We are dedicated to helping you find the perfect fitment for your ride while also bringing you the highest quality, affordable aftermarket parts in the world! We are truck and car enthusiasts who build their dream rides with these very products.

Shipping
Shipping times vary depending on item and immediate availability. Many suspension kits will ship out within 3-5 business days while some select items may take up to 7-10 business days. You will receive the tracking information via email as soon as it is available so you can easily track your package(s) from us, to your door. Keep in mind, some suspension components may ship separately and could arrive at different times. All shipping prices are based on the lower 48 states unless specified otherwise. Always inspect your items immediately upon receipt and notify us within 5 business days if there are any concerns, damages, or missing items.

Warranty
All manufacturer warranties apply and we will support you as the customer in ensuring you get a quality product. For any questions or concerns please email info@customoffsets.com NOTE: Returns not related to a warranty issue may result in a 20% shipping, handling, and restocking fee. Please also note that you have 30 days from the delivery date to inventory and verify lift kit components. You must contact us within this 30 day period in order to have missing/damaged parts sent to you free of charge. After 30 days from date of delivery any missing parts or damaged parts will be the customers expense to replace and/or fix. Click here to learn more about our warranty.

WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Outdated browser detected Unfortunately we do not support Internet Explorer. We recommend that you use Google Chrome, Mozilla Firefox, or Microsoft Edge.

Sign up to be notified when item is back in stock

Enter your email here and we'll let you know when this is in stock again