BDS Suspension 6

BDS Suspension 6" Coil-Over Lift Kit | 19-20 Chevrolet/ GMC 1500 4WD

Be the first to review this product

$3860

USD

Free shipping to the lower 48

Financing Available

We no longer sell this item. Online Store

Part Number

746F

Details

At the heart of these new systems are a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs with mounting brackets. The reservoir is available with optional DSC (dual speed compression) adjustment technology built in to allow for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. To go along with the coilovers are a pair of specially designed 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the 3-piece heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system tying into the frame and control arm pockets to further secure the front differential to keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Rounding out the front of this kit are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength.

In the rear of this 6" lift system, the factory block is replaced with a 5" lift block and longer u-bolts to lift and level the stance. Also included, BDS supplies brake line and ABS line brackets allow the use of factory brake lines. Specially tuned FOX 2.0 IFP performance series gas shocks are supplied to round out the rear of these kits. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions.

Notes

  • Does NOT fit Diesel Models.
  • Requires frame bracket modification
  • Will not fit models with Adaptive Ride Control (ARC)
  • Factory 17-18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled
  • 17" wheels with 4.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle / tie rod
  • All aftermarket wheels should be test fit prior to mounting the tire to ensure proper clearance to the brake caliper. Some wheel profiles will not clear the brake caliper. These can be test fitted before the vehicle is lifted in a stock condition
  • Will install on Trail Boss/AT4 models, however will net 4.5" of lift over stock
  • Actual ride height on coilover kits is closer to 6.5'' of lift

Fitment

2020 Chevrolet Silverado 1500 Custom 4WD
2020 Chevrolet Silverado 1500 Custom Trail Boss 4WD
2020 Chevrolet Silverado 1500 High Country 4WD
2020 Chevrolet Silverado 1500 LT 4WD
2020 Chevrolet Silverado 1500 LT Trail Boss 4WD
2020 Chevrolet Silverado 1500 LTZ 4WD
2020 Chevrolet Silverado 1500 RST 4WD
2020 Chevrolet Silverado 1500 SSV 4WD
2020 Chevrolet Silverado 1500 WT 4WD
2019 Chevrolet Silverado 1500 Custom 4WD
2019 Chevrolet Silverado 1500 Custom Trail Boss 4WD
2019 Chevrolet Silverado 1500 High Country 4WD
2019 Chevrolet Silverado 1500 LT 4WD
2019 Chevrolet Silverado 1500 LT Trail Boss 4WD
2019 Chevrolet Silverado 1500 LTZ 4WD
2019 Chevrolet Silverado 1500 RST 4WD
2019 Chevrolet Silverado 1500 SSV 4WD
2019 Chevrolet Silverado 1500 WT 4WD
2020 GMC Sierra 1500 AT4 4WD
2020 GMC Sierra 1500 Base 4WD
2020 GMC Sierra 1500 Denali 4WD
2020 GMC Sierra 1500 Elevation 4WD
2020 GMC Sierra 1500 SLE 4WD
2020 GMC Sierra 1500 SLT 4WD
2019 GMC Sierra 1500 AT4 4WD
2019 GMC Sierra 1500 Base 4WD
2019 GMC Sierra 1500 Denali 4WD
2019 GMC Sierra 1500 Elevation 4WD
2019 GMC Sierra 1500 SLE 4WD
2019 GMC Sierra 1500 SLT 4WD

Product Reviews (0)

Write a Product Review

Be the first to write a review!


About Us
We are dedicated to helping you find the perfect fitment for your ride while also bringing you the highest quality, affordable aftermarket parts in the world! We are truck and car enthusiasts who build their dream rides with these very products.

Shipping
Shipping times vary depending on item and immediate availability. Many suspension kits will ship out within 3-5 business days while some select items may take up to 7-10 business days. You will receive the tracking information via email as soon as it is available so you can easily track your package(s) from us, to your door. Keep in mind, some suspension components may ship separately and could arrive at different times. All shipping prices are based on the lower 48 states unless specified otherwise. Always inspect your items immediately upon receipt and notify us within 5 business days if there are any concerns, damages, or missing items.

Warranty
All manufacturer warranties apply and we will support you as the customer in ensuring you get a quality product. For any questions or concerns please email info@customoffsets.com NOTE: Returns not related to a warranty issue may result in a 20% shipping, handling, and restocking fee. Please also note that you have 30 days from the delivery date to inventory and verify lift kit components. You must contact us within this 30 day period in order to have missing/damaged parts sent to you free of charge. After 30 days from date of delivery any missing parts or damaged parts will be the customers expense to replace and/or fix. Click here to learn more about our warranty.

WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Outdated browser detected Unfortunately we do not support Internet Explorer. We recommend that you use Google Chrome, Mozilla Firefox, or Microsoft Edge.

Sign up to be notified when item is back in stock

Enter your email here and we'll let you know when this is in stock again