ICON .75-1.75

ICON .75-1.75" RXT Rear Suspension Kit (10-14 Ford F-150 SVT Raptor)

Be the first to review this product

$6700

USD 06-23-2022

Free shipping to the lower 48

Financing Available

All ICON products are experiencing 12-16 weeks delayed shipping. Additional delays are possible.

Part Number

K93055

Details

The Ford SVT Raptor is an extremely capable truck that has captured the attention of the off-road community over the past few years. Since the Raptors release ICON Vehicle Dynamics engineers have pushed this vehicle to extremes in order to develop the most comprehensive suspension components on the market. From the brutal deserts of the Southwest, to the deep snow of Michigans U.P., to the wooded trails of the East coast, ICON suspension systems have been put to the test and performed flawlessly. Unable to leave well-enough alone, ICON is once again aiming to raise the bar in Raptor performance with the introduction of the RXT Rear Suspension System.

Through a combination of in-house R&D and close collaboration with several Raptor enthusiast groups, ICON has spent the better part of the last year identifying limiting factors in OE components and looking to further extrapolate performance out of this vehicle. The RXT Rear Suspension System includes an all-new RXT 3.0 Rear Bypass shock and an RXT Multi-Rate Leaf Spring that work in conjunction with the ICON Raptor Rear Bump Stop Kit. Installation of this system replaces the aforementioned limiting factors and completely redefines the potential of this truck with a 20% increase in up-travel, a 30% increase in down-travel, and the ability to adjust the leaf spring rate to compensate for varying vehicle setups.

ICON Raptor Rear Bump Stop Kit: The job of the bump stop is to control and limit the final position of the suspension during up-travel. The OE rear bump stop is made of foam rubber, is limited on how much energy it can absorb, and is also a limiting factor in the amount of travel that can be had in the rear of the Raptor. The ICON Raptor Rear Bump Stop Kit utilizes a velocity-sensitive 2.0 hydraulic bump stop that increases the amount of energy absorbed the faster it is hit. This kit was originally designed to limit bump at the factory location, but has always had a provision to allow for more up-travel through the use of a removable spacer. When combined with the RXT leaf spring and rear shock, the spacer can be removed resulting in a drastic increase in up-travel and off-road performance.

ICON RXT Multi-Rate Leaf Spring: To take advantage of the additional travel that the RXT Rear Suspension System offers, ICON engineers had to scrap the OE leaf springs and develop a replacement that addressed issues found in the R&D process. The result is a user-adjustable multi-rate leaf pack that offers a major performance gain for almost every Raptor setup imaginable. Features like tip inserts and leaf separators add to ride comfort, while a triple military wrapped front and rear half wrapped eyelet increases durability and strength of the leaf spring. A rebound leaf was added to reduce the axle wrap of the Raptor, which was another issue that has been found through ICONs extensive testing. To increase the ride quality of the truck and gain additional droop travel, the spring rate has been lowered slightly. While most Raptor owners will embrace this, there are those who have outfitted their trucks with a significant amount of weight in the form of a chase rack, spare tires and parts, or other additions. Understanding this, the leaf pack was designed with an additional leaf (included with kit) that can be exchanged or added to the pack, yielding an additional 10% or 20% spring rate that will handle heavier vehicles.

ICON RXT 3.0 Rear Bypass Shock: To complete the RXT Rear Suspension System, a new shock had to be developed that could control the suspension throughout this new range of travel, as well as stand up to the off-road abuse that the Raptor would now be capable of delivering. The increase in up-travel was answered with a unique side-mount eyelet approach that allowed ICON engineers to develop a shock that is shorter in collapsed length, longer at extension, and still fits in the factory mounting location. A Dual Hose Recirculating Reservoir (Patent Pending) incorporates a check valve that allows hot fluid in the shock body to be exchanged with cooler fluid in the reservoir. The result of this is the ability of the Raptor to be driven harder for longer periods of time without the worry of shock fade and degraded performance.

Features


  • Hydraulic Bump Stop System: 
    • 6061 Solid billet cross bar that is polished & anodized
    • Bump stop striker pad does not require leaf spring disassembly
    • Clamshell brackets strengthen frame in critical areas preventing frame damage from extreme off road use
    • Comfortable on road manners with sufficient damping capability under extreme load
    • Cross member and tension rods stabilize frame rails and prevent twisting under hard impacts
    • Designed for increased leaf spring clearance so there is no loss in up travel with stock or aftermarket springs
    • Easy bolt on installation without having to remove the truck bed
    • Hydro-pneumatic bump stop increases bump energy capacity
    • Increases frame rigidity and improves overall vehicle dynamics
    • Industry first billet cross beam
    • Integrated adjustability for future ICON Raptor specific products
    • Pre-tuned and Nitrogen charged for most Ford Raptors
    • Reduces rear end kick and improves overall performance
    • Velocity sensitive Hydro-pneumatic bump stop increases the amount of energy absorbed the faster it is hit

  • Raptor RXT Multi-Rate Leaf Spring:
    • 3 User-adjustable spring rates for unique setups
    • Triple military wrap front eyelet and rear half wrap for increased durability
    • Rebound leaf reduces severe axle wrap
    • Tip inserts and leaf separators to reduce friction and improve ride comfort
    • OE style bonded rubber bushings that are maintenance free and do not squeak
    • Bumpstop extensions included for use when no aftermarket bumpstop kit is installed
    • New Ford OE front spring eye bolts included for easy removal and re-installation of springs
    • Rate Configuration Info:
      • Standard
        • +0.75" Lift over stock
      • Rate Option #1
        • 10% Rate over standard configuration
        • +1.25" Lift over stock
        • +0.75" Lift over stock w/ 300lb constant load
      • Rate Option #2
        • 20% Rate over standard Configuration
        • +1.75" lift over stock
        • +0.75" lift over stock w/ 600lb constant load

  • Raptor RXT Rear 3.0 Bypass Shock: 
    • 3.0 RXT 3 tube bypass rear shock with 3.0 remote reservoir
    • Anti-Wobble Link (Patent Pending) keeps bypass tubes clear of leaf spring and tire
    • Direct bolt in to OEM location with bypass adjustment knobs easily accessible for tuning adjustment
    • Easy-to-Adjust detented adjustment knobs offer quick adjustability without the use of tools
    • High flow CNC machined welded bypass blocks designed to increase fluid flow for enhanced performance & high definition tuning
    • High resolution bypass valves designed for noticeable fine tune adjustments in rebound and compression
    • Multi stage cad plated finish with polished and anodized top cap / rod ends
    • Protective shin guards standard with every kit
    • Recirculating Dual Hose Reservoir (Patent Pending) keeps shock temperatures low by pumping heat to the reservoir for increased dissipation
    • Replaceable bypass tubes that can easily be replaced if damaged
    • Special engineered damped valve seats for quiet and precise operation without the standard bypass loud clicking noise you will find with other brands
    • Unique side-mounted upper eyelet allows for increased up-travel while utilizing factory mounting location

Notes


  • Shocks Are Fully Serviceable. Coilover Heights Indicated Are For A Stock Equipped Vehicle
  • Aftermarket Exhaust May Need To Be Slightly Modified For Use With This Kit
  • Installation Of Complete Icon System Required To Attain Advertised Wheel Travel. Use Of Any Other Manufacturers Components (Re Leaf Springs, Bump Stop Kit, Shocks) Will Not Provide Advertised Wheel Travel And Could Cause Unknown Damage.

What's Included

  • (1) 10-14 RAPTOR REAR HYD BUMP STOP KIT
  • (1) 10-14 RAPTOR RXT 3.0 ZETA RR PAIR
  • (1) 10-14 RAPTOR MULTI RATE LEAF SPRING KIT

Fitment

2014 Ford F-150 SVT Raptor 4WD
2014 Ford F-150 SVT Raptor 4WD
2013 Ford F-150 SVT Raptor 4WD
2013 Ford F-150 SVT Raptor 4WD
2012 Ford F-150 SVT Raptor 4WD
2012 Ford F-150 SVT Raptor 4WD
2011 Ford F-150 SVT Raptor 4WD
2011 Ford F-150 SVT Raptor 4WD
2010 Ford F-150 SVT Raptor 4WD
2010 Ford F-150 SVT Raptor 4WD

Product Reviews (0)

Write a Product Review

Be the first to write a review!


About Us
We are dedicated to helping you find the perfect fitment for your ride while also bringing you the highest quality, affordable aftermarket parts in the world! We are truck and car enthusiasts who build their dream rides with these very products.

Shipping
Shipping times vary depending on item and immediate availability. Many suspension kits will ship out within 3-5 business days while some select items may take up to 7-10 business days. You will receive the tracking information via email as soon as it is available so you can easily track your package(s) from us, to your door. Keep in mind, some suspension components may ship separately and could arrive at different times. All shipping prices are based on the lower 48 states unless specified otherwise. Always inspect your items immediately upon receipt and notify us within 5 business days if there are any concerns, damages, or missing items.

Warranty
All manufacturer warranties apply and we will support you as the customer in ensuring you get a quality product. For any questions or concerns please email info@customoffsets.com NOTE: Returns not related to a warranty issue may result in a 20% shipping, handling, and restocking fee. Please also note that you have 30 days from the delivery date to inventory and verify lift kit components. You must contact us within this 30 day period in order to have missing/damaged parts sent to you free of charge. After 30 days from date of delivery any missing parts or damaged parts will be the customers expense to replace and/or fix. Click here to learn more about our warranty.

WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Outdated browser detected Unfortunately we do not support Internet Explorer. We recommend that you use Google Chrome, Mozilla Firefox, or Microsoft Edge.

Sign up to be notified when item is back in stock

Enter your email here and we'll let you know when this is in stock again