Enjoy as low as 0% APR Financing - Upgrade Now, Pay Later

Icon Vehicle Dynamics 1.25-3" Lift Stage 2 Suspension System Tubular Toyota 4Runner 4WD 2025

Be the first to review this product

Arrow Filled Caret Down

$3370.00


ESTIMATED DELIVERY: Mon, November 16 to the lower 48

Payment as low as $/week

Part Number

K53402T-ICN

Notes

Note:

  • Only fits 4WD models
  • Advertised lift heights based on models equipped with gasoline engine
  • An adjustable track bar is recommended to realign the axle but not required
  • Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.
  • Shocks are fully serviceable
  • Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles
  • Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
  • This kit is configured for fitment on 4WD models. If installing onto a 2WD Toyota Tacoma or 4Runner, front differential drop kit part number 55160 is not needed and the other suspension system components can be purchased individually with full system functionality. 2WD specific kits are coming soon!

Details

ICON 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON'S primary focus is increased wheel travel and damping ability, translating into outstanding control and ride quality on and off-road.ICON Vehicle Dynamics 2025 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 2 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring internal reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle "feel" through the range of travel. These coilovers are height adjustable from 1.25-3" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load.The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while .75" of rear lift height over stock allows a for level stance front to rear. ICON 2.0 Aluminum Series internal reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025 Toyota 4Runner Stage 2 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Features:
  • Vehicle specific tuned front and rear shocks for superior shock damping and control
  • Increased wheel travel and improved ride quality over stock
  • Front differential drop provides better maximum operating angle for CV joints and maximizes available wheel travel
  • Adjustable 2.5 Series coilovers provide 1.25-3" front lift height over stock
  • Tubular UCAs for added strength, durability, and alignment correction for better drivability
  • UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation
  • 6061 aircraft grade aluminum CNC machined components
  • Corrosion resistant CAD plated coilover shock bodies with 7/8" shafts
  • Dual rate rear coil springs improve performance and ride quality while providing .75" of rear lift
  • FK Rod End bearings for extended longevity and minimal deflection
  • 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
Specification:
  • OEM Wheels & Tires Fitment: Yes
  • Recommended Aftermarket Wheels: 17x8.5 with 6.32-Inch Backspace / 40mm Offset
  • Recommended Aftermarket Wheels: ICON Alloys - 18x9 with 6.6-Inch Backspace / 40mm Offset
  • Recommended Aftermarket Tires: 33-Inch x 11.50-Inch (Larger tires may fit but fender trimming and modifications will be required.)

Fitment


Product Reviews (0)

Write a Product Review

Be the first to write a review!


About Us

We are dedicated to helping you find the perfect fitment for your ride while also bringing you the highest quality, affordable aftermarket parts in the world! We are truck and car enthusiasts who build their dream rides with these very products.

Shipping

Shipping times vary depending on item and immediate availability. Unless a specific lead time is listed on this page, expect to receive an email with an ETA within 1-3 days of placing your order. Many suspension kits will ship out within 3-5 business days while some select items may take up to 7-10 business days. Availability on backordered or built-to-order products can vary and we will keep you informed via email with any ETA changes. You will receive the tracking information via email as soon as it is available so you can easily track your package(s) from us, to your door. Keep in mind, some suspension components may ship separately and could arrive at different times. All shipping prices are based on the lower 48 states unless specified otherwise and do not include any duties or customs fees you may be subject to for international orders.

What to Expect Upon Delivery

Always inspect your items immediately upon receipt and notify us if there are any concerns, damages, or missing items. Please verify that all boxes and parts are present and correct using the packing slip or instructions before starting installation or bringing your vehicle to a mechanic. We are unable to assist with any costs accrued from delayed installs due to missing parts. If parts are missing or show signs of shipping damage, please contact us immediately so we can assist you with a replacement; claims of missing or damaged parts made more than 14 days after delivery cannot be honored.

Cancellation Policy

Please reach out to us for any order changes or cancellation requests and we will work with you to adjust your shipment. Our processes have been optimized to have your order completed and shipped as quickly as possible which means your order may be further along in the pulling and packing process than you might expect. All cancellations may be subject to a restocking fee, unless the mistake is ours.
Any cancellation may carry a restocking fee that is dependent on the items ordered as well as the stage the order is in at the time of cancellation. If the cancellation request is received within 24 hours from the time of purchase, these fees may be waived. The restocking fee is typically around 10-25% but, due to vendor contracts as well as shipping and handling expenses, some products can carry a higher restocking fee once processing has begun.

Return Policy

Before placing your order or starting a return, our team can help confirm fitment to reduce the risk of ordering the wrong product - and if we confirm fitment and it doesn’t fit, we’ll make it right.

Our return guidelines are designed to be fair and consistent, but we also understand that not every situation fits perfectly into a written policy. If something doesn’t go as planned, we encourage you to reach out. Our team will always review your situation thoughtfully including whether the issue was related to fitment guidance, order accuracy, or product condition - and work with you to find the best possible resolution. Our goal is to make sure you’re taken care of, and customer satisfaction is always a top priority for our team.

While many of our products require significant preparation, handling, and shipping, we also understand that every situation is unique. Returns aren’t always black and white, and we’re committed to working with our customers to find the fairest solution possible.

In some cases, we may need to recover certain costs associated with preparing and shipping your order. However, if an issue occurs due to an error on our part, including situations where our sales team has recommended an incompatible setup, we’ll absolutely take that into account and work with you to make things right. If our sales team confirms fitment and it doesn’t fit, we’ll take it back with no restocking fees as long as the item is still in like-new condition.

Return Handling Costs

We understand that fitment issues or product choices can sometimes be confusing. If our sales team recommended a size or specification that turns out to be incompatible, or if we made an error with your order, we’ll work with you to make the return process easier - including waiving restocking or return shipping costs when the return is related to a fitment recommendation or order error on our part.

Returns may be subject to a restocking fee, which varies based on the product and its manufacturer. Fees are evaluated on a case-by-case basis, and we always consider the circumstances surrounding a return. If you have questions about a specific product, please feel free to Contact Us before starting a return.

For returns originating outside of the lower 48 U.S. states, customers may be responsible for return shipping costs, including repacking, pickup, and transportation.

Return Authorization & Timing

All returns must be approved before items are sent back. Please Contact Us to request a return authorization. Return requests must be made within 30 days of receiving your order, and once approved, items must be shipped back within 10 days.

When needed, we can provide return packaging along with clear instructions on how to securely pack your items. If items are not packaged properly and are damaged during return shipping, the customer may be responsible for the cost of the damaged product.

One time services that we provide, such as ceramic coating, are non-refundable unless the return is due to an error on our part.

In order for an item to be warranty eligible, it must be purchased directly from our store. Warranties are non-transferable, and claims may only be submitted by the original purchaser.

Condition of Returned Items & Refunds

All products must be returned in new, unused condition, with no damage and including all original accessories (such as center caps). Items returned with signs of use, unexpected damage, or missing accessories may be subject to increased restocking fees or may be refused at our discretion.

If a return is declined for any of the reasons listed above, we will work with you to send the product(s) back to you at your expense. Once a return is approved and received, we aim to complete return inspections as quickly as possible, with most warehouse returns inspected within 3 business days. However, returns sent to the manufacturer are typically inspected within 10 business days after delivery. Approved refunds will be issued to the original payment method, minus any applicable fees, within 2-3 business days of passing the return inspection.

Individual Product Orders

Please inspect all items for damage before use. For wheel-only orders, customers are responsible for test-fitting the wheels on the vehicle before having tires mounted. Once tires have been mounted, we’re unable to accept a return, even if a fitment issue is discovered. Tires that show any mileage are not eligible for return.

Package Orders

For wheel and tire packages, we ask that all products be test-fitted before driving on them. Once wheels or tires have been mounted and driven on, we’re unable to accept returns. If you have any fitment questions or concerns, let us know before placing your order. Our team is always happy to help ensure the best possible fit. Since we move quickly, it’s important to notify us right away if any concerns come up.

Suspension & Accessories

All suspension and accessory items that are not warranty-related must be unused and uninstalled. Items that show signs of installation or attempted installation cannot be accepted and will be returned to the sender without credit.

Even if your situation doesn’t fit perfectly within the guidelines above, we encourage you to reach out. If something feels unclear or unfair, you may request an additional review - we want to get it right. Our team will always review your case with fairness and care.

Warranty

All manufacturer warranties apply and we will support you as the customer in ensuring you get a quality product. In some warranty situations, manufacturers may need to contact you directly. We are unable to assist with any costs not explicitly covered by the manufacturer's warranty policy, including, but not limited to, shipping or labor costs. For any questions or concerns please contact us. Please note that warranty claims are available to the original purchaser only. Click here to learn more about our warranty.

WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Outdated browser detected Unfortunately we do not support Internet Explorer. We recommend that you use Google Chrome, Mozilla Firefox, or Microsoft Edge.